Garage door springs are in charge of raising and lowering the garage door. They open and close the garage door. It also requires heavy strength to open and close the door, so they need to be periodically replaced.
Aside from that, you may also be able to hear a humming sound when the garage door tries to open and close. There are a few incidents which could cause this problem.
For example, something has been placed over the tracks, or there is an obstruction. Another reason behind the humming sound coming from your garage door springs is that they need repair and replacement.
You can hear the sound even when nothing is blocking the track, and you will know that it’s not entirely safe to open or close your garage door.
You can’t be sure if you should worry about the springs themselves, but instead of that, you should look at other parts such as cables.
Your garage door springs are usually made of various steel cables. These cables are wound to be similar to a coil and spring cycle; therefore, they can provide enough force for your garage door’s weight.
As time goes by, these parts tend to wear out, causing the need for replacement. If not replaced immediately, you will experience issues with the functionality of your garage door.
How Many types of Garage Door Springs Are There?
There are several types of springs, and they include:
Extension springs
These types of garage door springs are used in conjunction with a torsion spring. If your door is stiff, then the springs might need to be replaced. They usually last 8-10 years and can be attached to the backside of your garage door.
The size of the springs varies, but most of them are usually 9.5 inches long and 3 inches wide. In most cases, they have a diameter that is approximately 2 inches. Extension springs can be subdivided into:
Open-looped Ends
These open-looped garage door springs are usually found in the upper section of the track. These springs are in charge of lifting and holding the upper section of your garage door. Open-loop, closed-loop, and angle loop springs also refer to garage door springs with this end type.
Open-looped end springs are typically used for domed, single, and double car garages. When it comes to their size, they usually measure about 7 inches long and 3 inches wide, with a diameter of approximately 2 inches.
They can last from 8-10 years before they need replacement. The force produced by these types of springs is considerably strong, which is why they can be used in heavy-duty situations such as lifting a heavy garage door.
Double-looped Ends
Double-looped end springs are usually found at the lower section of the track. These springs are in charge of opening and closing the garage door. Double-looped end springs are typically used for double car garages.
When it comes to their size, they usually measure about 7 inches long and 3 inches wide, with a diameter of approximately 2 inches. They can last from 8-10 years before they need replacement.
The force produced by these types of springs is considerably strong, which is why they can be used in heavy-duty situations such as lifting the heavy garage door.
Clipped Ends:
Clipped ends for garage door springs are also known as bushing or roller type. They usually come in a set of two, and they are made up of steel. The clips slide into the rail, and they provide support.
The metal clip is attached to the backside of your garage door and can produce a large amount of force because it has coils. Bushing or roller type can be used for any garage door opener.
When it comes to their size, they usually measure about 3 inches long with a width of about 1 inch and thickness that ranges from 0.5-3/8 inch. Clipped end springs typically last 5-6 years before they need to be replaced.
Torsion Springs
These spiral cables will provide up and down motion for your garage doors. It has a stationary cable or rod anchored at one end and wound around a cone-shaped body to form a series of loops.
The other end attaches to the header above your garage door, providing up and down motion and giving enough force for the garage door’s weight. When the spring breaks, you might experience noise and vibration in your garage door’s movement.
These springs usually last for many years and need to be replaced every 10-15 years. As with extension springs, torsions can be further divided into:
Standard Torsion Spring
A standard torsion spring can be used in any garage door opener. If it breaks, the noise and vibration in the door’s motion will disappear. These springs usually last for many years and need to be replaced every 10-15 years.
Early Set Torsion Spring
Early set torsion springs are a particular type of spring used to prevent the garage door from opening while driving. They are designed in a way that they will break when too much force is applied to them. This type of spring is usually found in single-car garages, and they generally last 10-15 years.
Torque Master Torsion Spring
Torque Master Torsion Springs is a particular type of spring used to prevent the garage door from opening while driving. They are designed in a way that they will break when too much force is applied to them. This type of spring is also typically found in single-car garages, and they last approximately 10-15 years.
Steel Rolling Door Torsion Spring
Rolling doors have steel rolling door torsion springs that provide up and down motion for your garage doors. They have a stationary cable or rod anchored at one end and wound around a cone-shaped body to form a series of loops.
The other end attaches to the door header above your garage door, providing up and down motion and giving enough force for the garage door’s weight.
When the spring breaks, you might experience noise and vibration in your garage door’s motion. These springs usually last for many years and need to be replaced every 10-15 years.
Should a two-car garage door have two springs?
Yes, a two-car garage door should have two springs. One will be at the top, and one will be at the bottom. The pair work together to balance the weight load of your garage door and opener. The key to the proper operation is to make sure both springs are balanced and tensioned correctly.
How To Fix Garage Door Springs?
It’s not a good idea unless you have been trained on how to fix those things, as it requires minimal knowledge about the mechanics of a garage door. If you’re not sure how to fix it, you may even hurt yourself or damage your garage door system due to not knowing this field.
The best approach is to give us a call. Our expert technicians will inspect the condition of your garage door springs and replace them accordingly.
When it comes to replacing springs, there are a lot of factors that can go into it. For instance, the opener may also need to be replaced; the door may need to be level, or it might be necessary to fix the tracks.
Not knowing what you’re doing could result in severe damages and injuries. Professionals like ourselves should do these kinds of repairs as we know precisely what we’re doing and can guarantee your safety and have less chance of causing any damage to your property.
In addition to repairs, we can also help with maintenance. Regularly inspect your springs and cables so you can be sure they do not break or snap unexpectedly. You can find out more information about different kinds of garage door springs on this page.
We have been providing professional services in the area for a long time now, and we’re sure there to continue doing it. We will strive to be there for you whenever you need us most, and we’re the only company that will never rush through repairs.
We treat all of our customers in Los Angeles like family! Also, please remember to look at our site to find out more about what we can do for you.
We provide garage door spring replacement in both residential and commercial settings. We also offer repairs to broken cables, broken tracks, bent brackets/rollers/doors, off-track doors, and more.
Our garage door repair service is available throughout Los Angeles, including surrounding cities in Los Angeles County, Orange County, and Ventura County; for our services, call (323) 302-1223.
